Reliable fire and system protection
Differential current monitor type B with pre-warning function
Early detection of insulation faults can prevent failure of complete electrical plants. Fault current monitoring by measuring differential current is the ideal method for this application. The monitoring requirement for today’s supply systems get more and more complex. Electronic control of drives, switched power supplies and chargers or fluorescent lamps with electronic ballast units can create DC fault currents in the case of earth faults. Standard differential current monitors do not detect this type of faults.
| Complete article |  |
Sensorless Safety Standstill Monitor
2-channel standstill monitoring of motors
The new DOLD safety standstill monitor LH5946 detects standstill of disconnected motors independent of the rotating direction. It fulfils SIL 3 and PL e/SK 4 and is used to release a solenoid locking switch or to activate a mechanical hold in brake, e.g. on woodworking machines, machine tools, conveyor systems etc. This provides fast access to dangerous areas of a plant for service and maintenance.
| Complete article | |
Protection against being locked in
SAFEMASTER® STS of DOLD
SAFEMASTER® STS is a modular safety switch and key transfer system made of long lasting stainless steel. It is designed to be used on guard systems with gates and covers and combines the advantages of a safety switch, solenoid lock and key transfer in one system. One of the most important advantages is the protection against being locked in by means of a safety key.
Safemaster STS allows electrical monitoring ...
Complete article
300 dpi illustration to download
INFOMASTER B reduces standstill times
Extendable fault annunciator system for plants and buildings
The compact new -/first-message annunciator system INFOMASTER B of DOLD allows fast and economic localisation of failures in plants and buildings. A lot of time is saved when faultfinding and the failure reasons are detected. The special highlight of...
Complete article
300 dpi illustration to download
A new system, numerous possibilities:
The modular safety switch and key transfer system SAFEMASTER® STS of DOLD
DOLD, one of the leading manufacturers of industrial switchgear and automation systems, presents SAFEMASTER® STS: a modular safety switch and key interlock system. It is made of long lasting stainless steel and allows custom designed safety interlocking solutions for machines and plants.
For all kinds of industrial applications.
Complete article
Complete article
300 dpi illustration to download: cover picture
Machine
For less rejects in production!
Self monitoring solid state relay
| Complete article | |
300 dpi illustration to download
This will convince you!
Wireless E-stop fuction
The innovative DOLD-Safemaster W with BG- approval offers additional safety when entering mobile and stationary machines and plants especially with large or unobserved dangerous areas. The safety details are performance level (PL) “e” according to DIN ISO 13849-1 and safety category 4 according to DIN EN 954-1. Using a remote control, dangerous movements can be stopped safely in shortest time via radio connection.
| Complete article | |
safemaster M: Multifunctional Modular Safety System
Safety-Controller – with field bus connection, software free
A safe island in non-safe field bus systems is the cost effective solution for safety applications of medium complexity. Safemaster M has the functionality of a safety PLC which can be extended modularly with or without field bus connection.The heart of the system is the control unit. Integrated are input channels for e.g. 2 e-stop buttons and 4 start buttons as well as 3 safety category 4 output channels.
| Complete article | |
Stops damage on machines
Load monitor for industrial motors
The load monitors of the DOLD varimeter series are available with relay or with analogue output. Both units measure the effective power of electrical motors with variable motor load
| Complete article | |
300 dpi illustration to download
Low wearing and easy to go motor start
Softstarter with softstop function
The new softstarter generation Ministart GF 9016 of DOLD controls asynchronous motors up to75 A. By a special control of the semiconductors it is easy on motor and supply mains.
Ramp up/ramp down time and starting torque are...
| Complete article | |
300 dpi illustration to download
Safetyfunction in enclosure for consumer units
New ultra slim E-Stop-Module!
The e-stop module RK5942 of DOLD starts new demensions in designing again smaller safety modules. The width is reduced to 17.5 mm and the depth is only 70 mm. Many safety modules are already available in 22.5 mm at a depth of 120 mm. As the space in cabinets gets more and more important, Dold offers with this solution additional savings.
The safemaster protects...
| Complete article |
|
Competitively priced Solid State Relays with a perfect fit
With the new DOLD - Solid State relay powerswitch PH 9260 standard appli-cations can be
solved in an economic way. With it’s long life due to wear-free switching it is especially
suitable for high switching frequency and high numbers of switching cycles. Our PH9260 can
be used for varied appli-cations, as e.g. extruders, plasic moul-ding machines and heatings.
The single pole solid state relay switches at zero...
Complete article
300 dpi illustration to download
Safetyfunction in enclosure for consumer units
Complete article
300 dpi illustration to download
Compact Frequency relay for varied applications
The more powerful varimeter IL9837 includes...
Complete article
300 dpi illustration to download
+49 (0) 7723 6540