Latching relay
UG 8851
Article number:
0069378
Type:
UG8851.63PS AC/DC24-240V
Description
The latching relay UG 8851 is designed with a wide AC/DC nominal voltage range. Short pulses of several miliseconds switch the relay into a defined position. To change the contact position only low power is necessary. No energy is necessary to hold the relay in ON-state. This is energy efficientand reduces the powerdissipation of the unit. On loss of power the relay stays in it's defined position. The special feature of forcibly guided contacts (IEC 61810-3) allows safe monitoring of the contact state.
Technical specifications
| Enclosure design: | Switch cabinet |
|---|---|
| Nominal voltage: | AC/DC |
| Output contacts max.: | 4 NC contacts, 4 NO contacts |
| Suppressor circuit on the coil input: | Yes |
| Thermal current Ith max.: | 6 A |
| Thermal current Ith max.: | 6 |
| Type: | UG 8851 |
| Width: | 22,5 mm |
Advantages / Customer benefits
- Large voltage range AC/DC 24 ... 240 V
- Protection against manipulation by sealable transparent cover over setting switches
- More contacts at small design
- Energy saving, no holding capacity neccessary
Features
- According to IEC/EN 60947-5-1
- With forcibly guided contacts according to IEC 61810-3
- With manual operation and contact position indication via control lever
- With impulse energization A1 - A2
- With reset pulse B1 - B2
- As option 4 NC contacts, 4 NO contacts or 1 NC contact, 7 NO contacts or 4 changeover contacts
- With pluggable terminal blocks for easy exchange of devices
- With coded terminal blocks
- Width 22.5 mm