E. Dold & Söhne GmbH & Co. KG

Tel.: +49 7723 654-0
E-Mail: dold-relays@dold.com

• Representatives
• Contact form

Direct contact for orders

Tel.: +49 7723 654-454
E-Mail: ab@dold.com

Direct contact for technical questions

Tel.: +49 7723 654-459
E-Mail: rv@dold.com

Direct contact for shipping inquiries

Tel.: +49 7723 654-455
UG 6914.04/008

Output module relay

UG 6914.04/008

Contacts

Approvals and Markings

Variant

  • 0065990
  • UG6914.04/008
Zur Erweiterung der Steuereinheit UG 6911 können bis zu 3 Ausgangsmodule Relais mit anderen... more

Product description

Zur Erweiterung der Steuereinheit UG 6911 können bis zu 3 Ausgangsmodule Relais mit anderen Erweiterungsbausteinen in das Sicherheitssystem Eingebunden werden. Diese verfügen über 4 unabhängige sichere Relaisausgänge mit jeweils einem Schließer. Außerdem ist jedes der 4 Sicherheitsrelais mit einem Eingang für die externen Feedback-Kontakte (EDM) ausgestattet. Das UG 6914.04/008 hat zusätzlich 8 programmierbare, nicht sichere Halbleiterausgänge zur Statusmeldung (OUT-Status). Die Verbindung der Module erfolgt dabei einfach durch Aufschnappen auf den Tragschienenbus von SAFEMASTER PRO.

Technical specifications

Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Safety NO contacts: 4
Type: UG 6914.04/008

Advantages

  • For safety applications up to PLe, Cat. 4 and SIL 3
  • Less wiring because of configuration software SAFEMASTER PRO Designer
  • Easy planning because of Drag & Drop via graphic configuration software
  • Time and cost saving installation
  • Reduced wiring and space saving in cabinets
  • Flexible extension with safety input and output modules
  • Easy extendable via BUS-Rail
  • Comprehensive fault localisation and diagnostic
  • Memory card as option for simple maintenance
  • Compact design: Base- and extension modules with only 22.5 mm width

Features

  • 4 independent, single-channel safeta relay outputs configurable as:
    - 4 single outputs, safety category 1, with 1 NO contact
    - 4 single outputs, safety category 2, with 1 NO contact
    - 2 two-channel outputs, safety category 4, with 2 NO contacts
  • Optionally 8 freely usable, non-secure, solid-state reporting outputs (OUT-STATUS)
  • To extend SAFEMASTER PRO via DIN rail bus (IN-Rail Bus) in an easy way
  • 1 Feedback circuit each for 2 safety outputs with individual configurable reset
  • Status LEDs for comprehensive diagnosis
  • With pluggable terminal block for easy easy exchange of devises