Insulation monitor RN 5897

Numero Ordine: 0070034
Type: RN5897.12/61 DC12-24V 15K-100K

The insulation monitor RN 5897 of the VARIMETER IMD family is a solution for optimal insulation... altro

Descrizione del prodotto

The insulation monitor RN 5897 of the VARIMETER IMD family is a solution for optimal insulation monitoring of modern IT systems. The device can be used in the most flexible way for AC, DC and AC/DC systems even with large leakage capacity to earth (PE). The adjustment of the setting values is simple and user friendly done on 2 rotary switches on the front of the device. Via display and LEDs the measured value, device parameters and device status are indicated easy to read. With a sealable transparent cover the device is protectet against manipulation.

Specifiche tecniche

Width:	52,5 mm
Response value:	1 - 100 kΩ
IMD type:	AC, DC, AC/DC
Nominal voltage IT system:	AC 0 - 230, DC 0 - 230 V
Auxiliary voltage:	DC, AC/DC
Earth fault indicator:	Yes
Approvals:	UL
Response value type:	Adjustable
Enclosure design:	Distribution board
Type:	RN 5897

Downloads

Vorteile / Kundennutzen

Acc. to DIN VDE 0100-551 for mobile generator sets
Preventive fire and system protection
Detection of symmetric and asymmetric insulation faults
Quick fault localisation through selective earth fault detection to L+ and L-
Universal application in non-earthed AC, DC, AC/DC networks up to 300 V
Easy adjustment of response values and setting parameter via rotational switch and menu display
Suitable for large leakage capacitances up to 300 μF
Optimised reaction time for large leakage capacitances
Monitoring also with voltage-free mains
Measuring circuit L(+)/L(-) with broken wire detection (can be switched off)
Protective conductor PE1/PE2 with broken wire detection (can't be switched off)
No additional coupling device required

Merkmale

Insulation monitoring according to IEC/EN 61557-8
2 separate adjustable response thresholds (using e.g. for pre-Alarm and Alarm)
Setting range of 1st response value (Pre-Alarm): 20 kΩ … 500 kΩ
Setting range of 2nd response value (Alarm): 15 kΩ … 100 kΩ
2 changeover contacts für insulation failures-Pre-Alarm and -Alarm
Energized or de-energized on trip can be selected for indicator relay
Display for indication of measured value, device parameters and device status
Setting the maximum leakage capacitance to shorten the response time
Automatic and manual device self-test
Alarm storage selectable
Protection against manipulation by sealable transparent cover
External control input for combined Test-/Reset-button
3 wide voltage input for auxiliary voltage
Width 52.5 mm

Dold Italia S.r.l.