Standstill Monitor BD 5936

Numero Ordine: 0046456
Type: BD5936.17 AC50/60HZ 230V

The BD 5936 detecting standstills of 3- and 1-phase asynchronous motors. At 2 terminals of the... altro

Descrizione del prodotto

The BD 5936 detecting standstills of 3- and 1-phase asynchronous motors. At 2 terminals of the stator winding the BD 5936 measures the voltage of the slowing motor which has been induced. If the induction voltage approaches 0 this indicates that the device is at a standstill and the output relay is activated. Additional the monitor detects strand breaks between measurement inputs Z1 / Z2. If a line breakage is detected, the output relay goes into the normal position (as when the motor is running). This state is saved and can only be cleared by (briefly) switching off the auxiliary voltage.

Specifiche tecniche

Width:	45 mm
Auxiliary voltage:	AC, AC/DC
Classification:	Stillstandsüberwachung
Output contacts:	2 NO contacts, 2 NC contacts
Enclosure design:	Switch cabinet
Type:	BD 5936

Downloads

Vorteile / Kundennutzen

Standstill monitoring without sensor

Merkmale

According to IEC/EN 60255-1, IEC/EN 60255-26
For standstill monitoring of 3- and 1-phase asynchronous motors
Line breakage detection in the measurement circuit
Forcibly guided output contacts:
2 NO, 2 NC contacts for 250 V AC
LED indicators for motor standstill, line breakage and
operating voltage
Wire connection: also 2 x 1.5 mm2 stranded ferruled (isolated),
DIN 46 228/-1/-2/-3/-4 or
2 x 2.5 mm2 stranded ferruled DIN 46 228-1/-2/-3
Width 45 mm