Smart motorstarter, for Modbus
UG 9410
Codice prodotto:
0067521
Tipo:
UG9410PM 3AC200-480V 5A 0-10S
Descrizione
The smart motorstarter UG 9410 can be used for softstart, softstop, reversing and protecting 3 phase asynchronous motors. By measuring the line current a thermal model is used to calculate the motor temperature, and in the case of overtemperature the motor is disconnected. In addition also a thermo switch can be used. The reversing is done via relays. The relays are switched without current flow, this provides long service life.
Dati tecnici
| Controllo della temperatura: | Yes |
|---|---|
| Corrente di carico fino a: | 5 A |
| Interfaccia bus: | Modbus RTU |
| Larghezza: | 22,5 mm |
| Monofase / trifase: | 3 |
| Tensione ausiliaria: | DC 24 V |
| Tensione di carico fino a: | 3AC 200 - 480 V |
| Tipo di apparecchio: | UG 9410 |
Download
Vantaggi / Benefici per il cliente
- Widely used measuring and automation protocol
- Up to 7 functions in one device
- Reversing anticlockwise,
- Reversing clockwise
- Softstart
- Softstop
- Motor protection
- Phase sequence monitoring
- Phase failure monitoring
- Communication monitoring - 80 % less space
- Simple and time-saving commissioning as well as user-friendly
- Operation through parameterization via modbus
- Hybrid relay combines benefits of relay technology with non-wearing semiconductor technology
- High availablility by
- Temperature monitoring of semiconductors
- High withstand voltage up to 1500 V
- Load free relay reversing function
- Device overload - Pluggable clamps
- TWIN- connection terminals to loop auxiliary supply and Bus
Caratteristiche
- According to IEC/EN 60947-4-2
- Modbus RTU-interface
- To reverse 3 phase motors up to 0.18 kW ... 2.2 kW at 400 V
- 2-phase softstart, softstop
- 3 potentiometer for setting the modbus adress and baud rate
- 5 LEDs for status indication
- Reversing with relays without current, softstart, softstop with thyristor
- Galvanic separation between control circuit and power circuit
- Width: 22.5 mm
Articoli simili
