Solid-state relay / contactor
PI 9260
Codice prodotto:
0067462
Tipo:
PI9260.92/000/06 AC48-480V 30/12A
Descrizione
The solid-state relay PI 9260 was developed for switching resistive threephase A.C. current loads, and therefore serves as a replacement for an electronic contactor. Both 2-phase and 3-phase controlled versions are available. The DCB technology (direct copper bonding) ensures very good thermal transmission, so that high load currents are possible. The solidstate relay can be mounted on a variety of cooling surfaces. The device is also available as a ready-to-use version with a pre-dimensioned heat sink. This can simply be snapped onto a wide DIN rail. An LED display signals the status of the control input. The voltage range of 10 to 32 V allows for operation on digital controllers (PLC) or simple temperature regulators.
Dati tecnici
| Comando digitale (ON/OFF): | AC, DC |
|---|---|
| Corrente di carico fino a: | 60 A |
| Larghezza: | 67,5 mm |
| Numero di poli: | 2-pole, 3-pole |
| Tensione ausiliaria: | DC 24 V |
| Tensione di carico fino a: | AC 600 V |
| Tensione di picco inversa fino a: | 1600 Vp |
| Tipo di apparecchio: | PI 9260 |
Notizie
Download
Vantaggi / Benefici per il cliente
- High switching frequency and long life
- With heat sink for DIN rail mounting
- Silent vibration and shock resistance
- Providing outstanding EMC properties
Caratteristiche
- Three Phase AC solid-state contactor
- Meets generally the requirements of IEC/EN 60947-4-3
- Zero cross or instant-on switching
- 2 anti-parallel thyristors for each pole
- Direct copper bonded (DCB) technology
- Self-lifting box contact terminals
- Peak reverse voltage up to ±1600Vp
- Wide range AC and DC input control voltage
- Delivered with integrated heat sink for DIN rail mounting
- IP20 Touch protection