Extension module XF 6929

Numero Ordine: 0069254
Type: XF6929.23 DC24V

If more safety circuits are required than provided by a safety module, the extension module XF... altro

Descrizione del prodotto

If more safety circuits are required than provided by a safety module, the extension module XF 6929 from the SAFEMASTER series is used. With its forcibly guided contacts it can be used to safely connect control and load circuits as well as to multiply the number of safety contacts and for contact reinforcement of safety modules and PLCs with monitoring of the feed back circuit. Safe semiconductor outputs can be turned into volt free contacts using XF 6929.

Specifiche tecniche

Width:	17,5 mm
Cat. / PL acc. to EN ISO 13849-1:	4/e
SIL acc. to IEC/EN 62061:	3
Nominal voltage:	DC
Thermal current Ith max.:	8 A
1- / 2-channel:	1, 2
Connection:	Front side cage clamp terminals
Output contacts max.:	6 NO contacts, 2 NC contacts
Type:	XF 6929

Downloads

Vorteile / Kundennutzen

Safe contact multiplication
Cost and space saving alternative compared to contactors
Reinforced insulation acc. to IEC 60664-1 and IEC 61010-1-1

Merkmale

Can be used in conjunction with a suitable switchgear / control unit in safety applications as follows:
- Up to PL e and category 4 according to EN ISO 13849-1
- Up to maximum SIL 3 according to EN IEC 62061
- Up to SIL 3 according to EN 61508 and EN 61511
According to EN 50156-1 for furnaces
Control from semiconductor safety outputs (light curtains, e-stop, etc.) is also possible
Redundant and forcibly guided contacts
For 1- or 2-channel circuits
Indication for operating condition
Width: 17.5 mm