Input-Output interface relay IK 8701 . For switching lamp loads . Input interface relay, e.g. for activation of PLC . Output interface relay, e.g. for PLC-controlled loads Advantages . Optionally contacts with up to a maximum 4 changeover contacts . Optionally for 2-wire initiator activation . Optionally for switching low loads . Optionally for switching lamps with parallel compensation (e.g. HQ lamps) . Optionally for switching large inductive direct current loads . Optionally with a recovery diode (only DC devices) . Optionally with reliable release voltage of AC 120 V Features . According to EN 60947-5-1 . Pushbutton for manual actuation of the contact . Operating position display . High thermal current Ith . Width: 17.5 or 35 or 52.5 mm Technical specifications Output contacts max.: 2 C/O contacts Width: 17,5mm Enclosure design: Distribution board Nominal voltage: AC, DC, AC/DC Initiator triggering: Yes Suppressor circuit on the coil input: Yes Thermal current Ith max.: 16A Type: IK 8701 Manufacturer: E. Dold & Söhne GmbH & Co. KG Type: IK8701.01 AC50HZ 24V Art. No.: 0033882