Softstarter
IL 9017

These soft starters are robust electronic control units for soft starting of AC motors. By means of phase-angle control the current rises continuously. The motor torque behaves in the same way during start-up. This ensures that the drive can start without jerking. This eliminates the risk of damage to drive elements because the sudden starting torque does not occur during direct switch-on. This feature allows a low-cost design of the drive elements. A significant reduction in starting noise can also be observed. In belt conveyor systems, slippage or tipping over of the conveyed material is avoided. After successful start-up, the power electronics are bridged by means of an internal relay contact in order to minimise the losses in the device.

Features
. According to IEC/EN 60947-4-2
. Increases life of 1-phase squirrel motors and mechanical drives
. For single phase motors up to 1.5 kW
. Adjustable ramp time and starting torque
. Semiconductors will be bridged after start up
. LED indication
. Devices available in 2 enclosure version:
IL 9017: Depth 61 mm with terminals at the bottom for installations systems and industrial distribution systems according to DIN 43880
SL 9017: Depth 100 mm with terminals at the top for cabinets with mounting plate and cable duct
. Width 35 mm

Technical specifications
Widths: 35mm
Load voltage up to: AC 230V
For single-phase motors, 230 V up to: 1,5kW
Type: IL 9017


Manufacturer: E. Dold & Söhne GmbH & Co. KG
Type: IL9017 AC230V 1,5KW
Art. No.: 0049323