Trip circuit monitor UG 5124 The trip circuit monitor UG 5124 is used to monitor control and trip circuits in electrical controls. It detects interruptions of the trip circuit coil, interruptions of wires, increase resistance, welded contacts, missing control and auxiliary voltage. The setting of the both time delays is simply done on 2 rotary switches on the front of the device. As the power supply and the measuring circuit are galvanically separated, 2 different voltage sources can be connected. Advantages . Wide auxiliary voltage range DC 20 ... 265 V . Limiting of the power consumption at measuring circuit by a voltage independent constant current source . On delay- / release delay each adjustable Features . According to IEC/EN 60 255-1 . Monitors continuously breaker trip circuits . 2 changeover contacts . Galvanic separated electronic . De-energized on trip . With pluggable terminal blocks for easy exchange of devices . Terminal blocks coded . Width 22,5 mm Technical specifications Width: 22,5mm Enclosure design: Switch cabinet Output contacts: 2 C/O contacts Type: UG 5124 Manufacturer: E. Dold & Söhne GmbH & Co. KG Type: UG5124.82PS UH=DC20-265V 1,5mA Art. No.: 0067526