Smart motorstarter, for Modbus
UG 9410

The smart motorstarter UG 9410 can be used for softstart, softstop, reversing and protecting 3 phase asynchronous motors. By measuring the line current a thermal model is used to calculate the motor temperature, and in the case of overtemperature the motor is disconnected. In addition also a thermo switch can be used. The reversing is done via relays. The relays are switched without current flow, this provides long service life.

Advantages
. Widely used measuring and automation protocol
. Up to 7 functions in one device
- Reversing anticlockwise,
- Reversing clockwise
- Softstart
- Softstop
- Motor protection
- Phase sequence monitoring
- Phase failure monitoring
. 80 % less space
. Simple and time-saving commissioning as well as user-friendly
. Operation through parameterization via modbus
. Hybrid relay combines benefits of relay technology with non-wearing semiconductor technology
. High availablility by
- Temperature monitoring of semiconductors
- High withstand voltage up to 1500 V
- Load free relay reversing function
- Device overload
. Pluggable clamps
. TWIN- connection terminals to loop auxiliary supply and Bus

Features
. According to IEC/EN 60947-4-2
. Modbus RTU-interface
. To reverse 3 phase motors up to 0.18 kW ... 2.2 kW at 400 V
. 2-phase softstart, softstop
. 3 potentiometer for setting the modbus adress and baud rate
. 5 LEDs for status indication
. Reversing with relays without current, softstart, softstop with thyristor
. Galvanic separation between control circuit and power circuit
. Width: 22.5 mm

Technical specifications
Width: 22,5mm
Bus interface: Modbus RTU
1- / 3-phase: 3
Temperature monitoring: Yes
Load voltage up to: 3AC 200 - 480V
Auxiliary voltage: DC 24 V
Load current up to: 5A
Type: UG 9410


Manufacturer: E. Dold & Söhne GmbH & Co. KG
Type: UG9410PM 3AC200-480V 5A 0-10S
Art. No.: 0067521