Speed monitor
UH 6932

The speed monitor UH 6932 provides safe monitoring of motors and rotating equipment. It is used in machines and plants where machine movements or moving parts can be a danger to men and machine. Using the front side display the parameters can be easily and comfortably adapted to the individual application or changed when necessary.

Advantages
. For safety applications up to PL e / Cat. 4 and SIL 3
. Simple and time saving setup without PC
. Comfortable, menu guided configuration via frontside display
. Reducing interruption time in production by extensive diagnostic functions
. Easy to integrate in existing drive applications
. Possible languages: English, german, french

Features
. Corresponds to
- PL e and category 4 according to EN ISO 13849-1
- SIL 3 according to EN 61508
. Can be used in safety applications as follows:
- Up to maximum SIL 3 according to EN IEC 62061
- Up to SIL 3 according to EN 61511
. Overspeed, underspeed or window monitoring
. Integrated user friendly frontside display
- Comfortable, menu guided configuration
- For set point and actual value of Hz
. Fast reaction time by measuring duration of cycle of input frequency
. For PNP- or NPN-sensors
. Adjustable hysteresis
. Adjustable reset delay function from 0 ... 100 s
. Adjustable start up time delay from 0 ... 100 s
. Adjustable alarm delay from 0 ... 100 s
. Manual or auto-reset
. 2-channel function
. Forcibly guided output contacts
. LED-indicators and 2 semiconductor monitoring output
. Width 45 mm
. With pluggable terminal blocks for easy exchange of devices
. Variant /_ _1:
- It is possible to set a variety of response parameters by means of a 4 bit selection facility from an overriding control unit;
- Analog output (2 V to 10 V) corresponding to the current speed;
- The possibility of overriding the speed by a supervisory function (muting);
- Adjustable switchover time from 0 ... 100 s

Technical specifications
Cat. / PL acc. to EN ISO 13849-1: 4/e
1- / 2-channel: 2
Connection: Pluggable screw terminals, Pluggable cage clamp terminals, Pluggable cage clamp terminals 2-wire
Width: 45mm
SIL CL acc. to IEC/EN 62061: 3
Approvals: UL
Nominal voltage: DC
Forcibly guided output contacts max.: 2 NO contacts
Indicator contacts: 2 Semiconductor monitoring outputs
Classification: For initiators and encoders
Thermal current Ith max.: 8A
Type: UH 6932


Manufacturer: E. Dold & Söhne GmbH & Co. KG
Type: UH6932.02PS/61 DC24V
Art. No.: 0066816