Solid-state relay / contactor PI 9260 The solid-state relay PI 9260 was developed for switching resistive threephase A.C. current loads, and therefore serves as a replacement for an electronic contactor. Both 2-phase and 3-phase controlled versions are available. The DCB technology (direct copper bonding) ensures very good thermal transmission, so that high load currents are possible. The solidstate relay can be mounted on a variety of cooling surfaces. The device is also available as a ready-to-use version with a pre-dimensioned heat sink. This can simply be snapped onto a wide DIN rail. An LED display signals the status of the control input. The voltage range of 10 to 32 V allows for operation on digital controllers (PLC) or simple temperature regulators. Advantages . High switching frequency and long life . With heat sink for DIN rail mounting . Silent vibration and shock resistance . Providing outstanding EMC properties Features . Three Phase AC solid-state contactor . Meets generally the requirements of IEC/EN 60947-4-3 . Zero cross or instant-on switching . 2 anti-parallel thyristors for each pole . Direct copper bonded (DCB) technology . Self-lifting box contact terminals . Peak reverse voltage up to ±1600Vp . Wide range AC and DC input control voltage . Delivered with integrated heat sink for DIN rail mounting . IP20 Touch protection Technical specifications On/Off Input Control: DC, AC Widths: 67,5mm Number of poles: 2-pole, 3-pole Load voltage up to: AC 600V Auxiliary voltage: DC 24 V Load current up to: 60A Peak reverse voltage up to: 1600Vp Type: PI 9260 Manufacturer: E. Dold & Söhne GmbH & Co. KG Type: PI9260.92/000/06 AC48-480V 30/12A Art. No.: 0067462