Solid-state relay / contactor with analogue input for pulse packet control
PK 9260/_4_

The PK 9260 solid-state relay/contactor has an analogue control input DC 4 ... 20 mA with which the switch-on/switch-off ratio of the load current is controlled proportionally. The PK 9260 is available with pre-mounted heat sink (solid-state contactor) and without pre-mounted heat sink (solid-state relay).

Advantages
. Self-optimized impulse distribution with minimized cycle times
. Allows for precise temperature regulation
. Switching at zero crossing, providing outstanding EMC properties
. With heat sink for DIN-rail mounting
. Space saving, only 22.5 mm width

Features
. According to IEC/EN 60947-4-3
. AC solid-state relay / -contactor for pulse package control of heating systems
. DCB technology (direct bonding method) for excellent heat transmission properties
. Control input DC 4 … 20 mA
. Nominal voltage AC 24 ... 240 and AC 48 ... 480 V
. Load current 10 A, 15 A, 20 A, 40 A, 50 A, 88 A AC 51
. LED status indicator for control and failure
. M4 flat terminal
. Degree of protection IP20

Technical specifications
Widths: 22,5mm
Number of poles: 1-pole
Analog Input Control: 4 - 20mA
Load voltage up to: AC 480V
Load current up to: 88A
Type: PK 9260/_4_


Manufacturer: E. Dold & Söhne GmbH & Co. KG
Type: PK9260.91/040/00 AC24-240V AC10A
Art. No.: 0069706