Output module relay
UG 6914.04/008

Advantages
. For safety applications up to PLe, Cat. 4 and SIL 3
. Less wiring because of configuration software SAFEMASTER PRO Designer
. Easy planning because of Drag & Drop via graphic configuration software
. Time and cost saving installation
. Reduced wiring and space saving in cabinets
. Flexible extension with safety input and output modules
. Easy extendable via BUS-Rail
. Comprehensive fault localisation and diagnostic
. Memory card as option for simple maintenance
. Compact design: Base- and extension modules with only 22.5 mm width

Features
. 4 independent, single-channel safeta relay outputs configurable as:
- 4 single outputs, safety category 1, with 1 NO contact
- 4 single outputs, safety category 2, with 1 NO contact
- 2 two-channel outputs, safety category 4, with 2 NO contacts
. Optionally 8 freely usable, non-secure, solid-state reporting outputs (OUT-STATUS)
. To extend SAFEMASTER PRO via DIN rail bus (IN-Rail Bus) in an easy way
. 1 Feedback circuit each for 2 safety outputs with individual configurable reset
. Status LEDs for comprehensive diagnosis
. With pluggable terminal block for easy easy exchange of devises

Technical specifications
Cat. / PL acc. to EN ISO 13849-1: 4/e
Width: 22,5mm
SIL CL acc. to IEC/EN 62061: 3
Safety NO contacts: 4
Type: UG 6914.04/008


Manufacturer: E. Dold & Söhne GmbH & Co. KG
Type: UG6914.04/008
Art. No.: 0065990