Fuse monitor
UG 9075

Monitors the state of 1-3 fuses in single- or 3-phase voltage systems. e.g. for automatic disconnection and lockout of a 3 phase motor in the case of a fuse failure.

Advantages
. increasing the availability of plants by early detection of blown fuses, that may cause damage if undetected
. fast detection of blown fuses also with disconnected load availability of your plant on request
. reliable detection of blown fuses inspite of:
- Asymmetric mains
- Harmonic content

Features
. According to IEC/EN 60 255, DIN VDE 0435-303
. To monitor fuses in single and 3-phase AC voltage systems
. Undervoltage detection below 0.7 x UN
. No separate auxiliary necessary
. 2 changeover contacts
. 2 nominal voltages adjustable:
3/N AC 240 V / 140 V or 3/N AC400 V / 230 V or fixed nominal voltage: 3/N AC 110 V / 64 V
. Adjustable operate delay
. Energized on trip
. Automatic adjustment to 50 Hz and 60 Hz mains frequency
. Width 22.5 mm

Technical specifications
Width: 22,5mm
Operate delay: Yes
Enclosure design: Switch cabinet
1- / 3-phase: 3
Standard measuring range: 3 AC 110 - 400 V
Measuring range max.: 3 AC 400 V
Output contacts: 2 C/O contacts
Type: UG 9075


Manufacturer: E. Dold & Söhne GmbH & Co. KG
Type: UG9075.12PS 3/N AC240/140V+400/230V
Art. No.: 0065531