Emergency stop module BD 5987

Contacts

Nominal voltage

Approvals and Markings

Variant

Numero Ordine: 0037332
Type: BD5987.02 DC24V

The BD 5987 is used to interrupt a safety circuit in a safe way. It can be used to protect... altro

Chiudi menu

Descrizione del prodotto

The BD 5987 is used to interrupt a safety circuit in a safe way. It can be used to protect people and machines in applications with e-stop buttons and safety gates. The BD 5987.02/301 can be used as electronic replacement of a safety switch according to EN 81-20, section 5.11.2.2.

Specifiche tecniche

Width:	45 mm
Cat. / PL acc. to EN ISO 13849-1:	4/e
SIL CL acc. to IEC/EN 62061:	3
Nominal voltage:	AC, DC
Suited as safety gate monitor:	Yes
Thermal current Ith max.:	10 A
1- / 2-channel:	1, 2
Cross fault detection:	Yes
Connection:	Screw terminals
Output contacts max.:	2 NO contacts
Approvals:	UL-Recognized
Type:	BD 5987

Downloads

Vorteile / Kundennutzen

Safe disconnection of electrical circuits
Line fault detection at On pushbutton
Gold-plated contacts to switch small loads (input for PLC)
Optionally cross fault detection in emergency stop circuit

Merkmale

According to
- PL e and category 4 to EN ISO 13849-1
- maximum SIL 3 to EN IEC 62061
- SIL 3 to EN 61508
Output: 2 NO contacts for AC 250 V
1-channel or 2-channel connection
LED displays for channels 1 and 2
Overvoltage and short circuit protection
Wire connection: also 2 x 1,5 mm2 stranded ferruled (isolated), DIN 46 228-1/-2/-3/-4 or 2 x 2.5 mm2 stranded ferruled DIN 46 228-1/-2/-3
Width 45 mm
BD 5987._ _/001: same as BD 5987._ _ but
Optionally automatic On function or after activation by the On pushbutton
Optionally cross fault detection in emergency stop circuit
BD 5987.02/301: same as BD 5987.02/001 but
Suitable also for elevators according to EN 81-20/-50
Complies to the requirements of the directive 2014/33/EU for elevators
According to
- PL d and category 3 to EN ISO 13849-1
- maximum SIL 2 to EN IEC 62061
- SIL 2 to EN 61508
Shorter release time when opening the supply circuit
Single-channel e-stop circuit