Underload monitor (Cos-phi monitor) SK 9065

Numero Ordine: 0055816
Type: SK9065.11 3AC400V 0,4-8A

The underload monitor IK / SK / SL 9065 measures the phase shift between voltage and current.... altro

Descrizione del prodotto

The underload monitor IK / SK / SL 9065 measures the phase shift between voltage and current. The phase angle changes with changing load. This measuring method is suitable to monitor asynchronous motors on underload and no load independent of motor size. The early detection of up-coming break downs and preventive maintenance avoid expensive damages. As user you profit from the reliability and availability of your plant.

Specifiche tecniche

Width:	17,5 mm
1- / 3-phase:	1, 3
Measuring range max.:	8 A
Operate delay:	Yes
Auxiliary voltage:	Without
Output contacts:	1 C/O contact
Enclosure design:	Switch cabinet
Type:	SK 9065

Downloads

Merkmale

According to EN 60255-1
Detection of underload (cos ϕ)
Without auxiliary supply
Current up to 8 A Motors up to 5 A nominal current can be connected directly
Higher currents via current transformer
SL 9065CT with integrated current transformer for currents up to 100 A
Adjustable response value
Automatic reset (Alarm auto reset)
Adjustable operate delay up to 100 s
De-energized on trip
For single and 3-phase loads e.g. motors
Independent of phase sequence
1 changeover contact
LED indicator voltage supply and alarm
DIN rail or screw mounting
Devices available in 2 enclosure versions:
IK 9065: Depth 58 mm, with terminals at the bottom for installation systems and industrial distribution systems according to DIN 43880
SK 9065, SL 9065CT: Depth 98 mm, with terminals at the top for cabinets with mounting plate and cable duct
IK 9065, SK 9065 width 17.5 mm
SL 9065CT width 35 mm

IK/SK 9065/100: as IK/SK 9065 but:
Programmable for
- Automatic reset or manual reset (latched alarm)
- Energized or de-energized on trip
With reset button
Remote reset