Overcurrent Relay IK 9272

Numero Ordine: 0050068
Type: IK9272.11/010 AC220-240V 1-10A

The IK 9272 and SK 9272 overcurrent relays are suitable for monitoring currents in three-phase... altro

Descrizione del prodotto

The IK 9272 and SK 9272 overcurrent relays are suitable for monitoring currents in three-phase and alternating current networks. If the switchting point is exceeded, the relays change state after the time has elapsed. The relays can be used universally thanks to the adjustable switching point. Using the adjustable time delay, current peaks can be taken into account or faded out if required. The operational readiness and switching status of the output relay are signalled via an LED.

Specifiche tecniche

Width:	17,5 mm
1- / 3-phase:	1
Measuring range:	AC 0,05 - 10 A
Auxiliary voltage:	AC, DC
Operate delay:	Yes
Output contacts:	1 C/O contact
Enclosure design:	Distribution board
Type:	IK 9272

Downloads

Datasheet IK 9272, SK 9272 (PDF - 243.96 KB)

Vorteile / Kundennutzen

Adjustable switching delay
Closed circuit operation (output relay not activated in case of error)
Optionally open circuit operation (output relay activated in case of error)
Optionally manual reset, reset button on the front

Merkmale

According to IEC/EN 60255
Single phase
1 changeover contact
Measuring ranges from 0.05 ... 10 A
Fixed hysteresis approx. 4 %
Hysteresis function (auto reset)
LED indication for auxiliary voltage and contact position
Devices available in 2 enclosure versions:
IK 9272: Depth 59 mm, with terminals at the bottom for installation systems and industrial distribution systems according to DIN 43880
SK 9272: Depth 98 mm, with terminals at the top for cabinets with mounting plate and cable duct
Width 17.5 mm