Dold Italia S.r.l.

Via Privata Passo Pordoi, 5
20139 Milano
Italia
IL 9270

Overcurrent Relay

IL 9270

Contacts

Auxiliary voltage

Measuring range

Switching delay

Approvals and Markings

Variant

  • 0049963
  • IL9270.12/010 AC/DC24V 0,1-15A
The overcurrent relay is suitable for monitoring currents in three-phase and alternating current... altro

Descrizione del prodotto

The overcurrent relay is suitable for monitoring currents in three-phase and alternating current networks. When the switching point is exceeded, the relays changed their state after the time lapse. Due to the adjustable switching point, the relays are universally applicable. By means of the adjustable time delay, current peaks can be taken into account or faded out if required. Readiness for operation and overcurrent are each signaled via an LED.

Specifiche tecniche

Width: 35 mm
1- / 3-phase: 1
Measuring range: AC 0,1 - 50 A
Auxiliary voltage: AC, AC/DC
Operate delay: Yes
Output contacts: 1 C/O contact, 2 C/O contacts
Enclosure design: Distribution board
Type: IL 9270

Merkmale

  • According to IEC/EN 60255-1
  • IP 9270, SP 9270CT: 3-phase
    IK 9270, SK 9270, IL 9270, SL 9270CT: single phase
  • Measuring ranges from AC 0.1 ... 100 A
  • Settable response value
  • Fixed hysteresis
  • Settable time delay
  • De-energized on trip
  • As option energized on trip
  • LED indicators
  • With auxiliary voltage
  • Auxiliary supply and measuring input galvanic separated
  • Devices available in 2 enclosure versions:
    - I-model, e.g. IK _ _ _ _, depth 61 mm with terminals at the bottom for installation systems and industrial distribution systems according to DIN 43880
    - S-model, e.g. SK _ _ _ _, depth 100 mm with terminals at the top for cabinets with mounting plate and cable duct
  • Width IK 9270, SK 9270: 17.5 mm
    IL 9270, SL 9270CT: 35 mm
    IP 9270, SP 9270CT: 70 mm