Voltage and frequency monitor according to VDE-AR-N 4105:2011-08 RP 9810

Numero Ordine: 0064814
Type: RP9810.13 3/N AC400/230V >30KVA

The voltage and frequency module RP 9810 monitors in domestic generator sets the mains of the... altro

Descrizione del prodotto

The voltage and frequency module RP 9810 monitors in domestic generator sets the mains of the energy supplier. It is built up in a redundant way and each of the 2 channels act on a separate output relay. The adjustment is made via rotational switches. The factory default setting is according to the description in VDE-AR-N 4105:2011-08.

Specifiche tecniche

Width:	70 mm
1- / 3-phase:	3
Supply voltage:	3/N AC 400/230 V
Auxiliary voltage:	Without
Operate delay:	Yes
Output contacts:	3 C/O contacts
Enclosure design:	Distribution board
Type:	RP 9810

Downloads

Vorteile / Kundennutzen

Easy adjustment via rotational switch
Precise adjustment and indication of setting values
Indication, diagnostics and fault presentation via display
Protection against manipulation by sealable transparent cover over setting switches
Mains and system protection for your generator set

Merkmale

According to VDE-AR-N 4105:2011-08
Following DIN VDE 0126-1-1:2013-08
According to DIN EN 60255-1
Can be used according to EEG 2012 and SysStabV
Voltage and frequency monitoring for generator sets >30 kVA on public grid, as option also for ≤ 30kVA
Fail-safe because of 2-channel structure
Certificate of conformity (test certificate) of the BG ETEM
Monitoring of the section switches with measuring of response time
System test via test button
Isolated grid detection
Manual reset
With additional enabling input, e.g. for ripple control receiver
Connection or re-connection after adjustable delay time tw
Factory setting according to VDE-AR-N 4105:2011-08
Random controlled disconnection in the range of 50.2 Hz and 51.5 Hz for non-regulated power generation systems
Protection against manipulation by sealable transparent cover over setting switches
Additional fault signalling relay output
High measuring accuracy
Installion type enclosure 4TE (width x height x depth: 70 x 90 x 71 mm)