Remote switch IK 8800

Numero Ordine: 0000611
Type: IK8800.12 AC50HZ 240V

The contacts are actuated with every current pulse and they stay in the operating position they... altro

Descrizione del prodotto

The contacts are actuated with every current pulse and they stay in the operating position they have adopted in each case until the next pulse occurs. It is possible to actuate the contacts manually by pressing a pushbutton provided on the unit. The contact position is shown by an indicator. The units can be installed in rows close next to each other for pulse operation. The gap between the relays is 7 mm when they are on permanently.

Specifiche tecniche

Width:	17,5 mm
Thermal current Ith:	16 A
For top hat rail mounting:	Yes
Output contacts max.:	4 C/O contacts
Type:	IK 8800

Downloads

Vorteile / Kundennutzen

Optionally with up to max. 4 changeover contacts
Low energy consumption by impulse operation
Small amount of wiring required at installations with serval local push buttons

Merkmale

According to IEC/EN 60 669
Impulse operation
Pushbutton for manual actuation of the contacts
Operating position display
Optionally contacts with up to a maximum of 4 changeover contacts
Width 17.5 mm or 35 mm