Dold Italia S.r.l.

Via Privata Passo Pordoi, 5
20139 Milano
BI 5910

Radio controlled safety module

BI 5910


Nominal voltage

Approvals and Markings


  • 0059002
  • BI5910.22/00MF9 DC24V
The Wireless E-Stop-System includes a very compact and ergonomic remote control RE 5910 and a... altro

Descrizione del prodotto

The Wireless E-Stop-System includes a very compact and ergonomic remote control RE 5910 and a safety module with radio control BI 5910. The remote control provides personal protection when entering dangerous areas and allows besides the emergency stop function also control functions with the integrated push buttons and switches. The safety outputs of the BI 5910 guarantee safe disconnection. For control functions it includes 7 semiconductor outputs.

Specifiche tecniche

Width: 67,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
Application: Emergency stop, Light barrier, Safety gate, Start, Wireless
Safe output contacts, redundant NO contacts: 3
NC contacts: 1
Solid state outputs not safe (radio): 6
Feedback for external monitoring: Yes
Type: BI 5910

Vorteile / Kundennutzen

  • Ideal solutions for mobile and stationary machines and plants with dangerous areas
    - During automatic operation e. g. to clear failures
    - During set up e. g. to adjust machine parameters, maintenance, set up
  • Higher availability of machines because damage of trailing cables is avoided
  • Less mounting, installation and wiring time
  • No wearing on trailing cables, slip rings etc.
  • Easy retrofit and modernising of machines
  • Optimised sight on operating area during set up
  • User legitimating with electronic key on remote control possible


Total System

  • According to
    - Performance Level (PL) e and category 4 to EN ISO 13849-1: 2015
    - Safety Integrity Level (SIL 3) to IEC/EN 61508
  • Applicabel in the scope of the EN 60204-1as well as in emergeny stop applications according to EN ISO 13850
  • Safety radio transmission
  • Radio receiver for:
    - E-stop
    - Control signals for 6 non-safety semiconductor outputs

Radio Controlled Safety Module

  • Adjustable functions with step switch for:
    - Manual start or automatic start
    - When removing the remote control from the charger (open control contact) manual start is possible by remote control
    - Possibility of disabling the access protection (gate) with active remote control
  • Broken wire and short circuit monitoring with error indication
  • Feedback circuit Y1/Y2 for monitoring of exernal contactors
  • 2 semiconductor outputs for status indication
  • Removable terminal blocks allow fast exchange of module
  • Compact unit, only 67.5 mm width