Latching relay UG 8851

Numero Ordine: 0065644
Type: UG8851.19PS AC/DC24-240V

The latching relay UG 8851 is designed with a wide AC/DC nominal voltage range. Short pulses of... altro

Descrizione del prodotto

The latching relay UG 8851 is designed with a wide AC/DC nominal voltage range. Short pulses of several miliseconds switch the relay into a defined position. To change the contact position only low power is necessary. No energy is necessary to hold the relay in ON-state. This is energy efficientand reduces the powerdissipation of the unit. On loss of power the relay stays in it's defined position. The special feature of forcibly guided contacts (IEC 61810-3) allows safe monitoring of the contact state.

Specifiche tecniche

Width:	22,5 mm
Nominal voltage:	AC/DC
Suppressor circuit on the coil input:	Yes
Thermal current Ith max.:	6 A
Output contacts max.:	4 NO contacts, 4 NC contacts
Enclosure design:	Switch cabinet
Type:	UG 8851

Downloads

Vorteile / Kundennutzen

Large voltage range AC/DC 24 ... 240 V
Protection against manipulation by sealable transparent cover over setting switches
More contacts at small design
Energy saving, no holding capacity neccessary

Merkmale

According to IEC/EN 60947-5-1
With forcibly guided contacts according to IEC 61810-3
With manual operation and contact position indication via control lever
With impulse energization A1 - A2
With reset pulse B1 - B2
As option 4 NC contacts, 4 NO contacts or 1 NC contact, 7 NO contacts or 4 changeover contacts
With pluggable terminal blocks for easy exchange of devices
With coded terminal blocks
Width 22.5 mm