Dold Italia S.r.l.

Via Privata Passo Pordoi, 5
20139 Milano
GB 9034

Motor brake relay

GB 9034

Nominal voltage

Auxiliary voltage

Braking current

Approvals and Markings


  • 0056975
  • GB9034 100A AC50/60HZ 400V
The electronic braking devices enable wear-free braking of three-phase and alternating current... altro

Descrizione del prodotto

The electronic braking devices enable wear-free braking of three-phase and alternating current asynchronous motors. The braking devices are used for drives that must be reliably braked for safety and functional reasons. Depending on the device version and the user‘s specification, the braking current switches off after a set braking time or via the integrated standstill detection after the motor has come to a standstill. With standstill-dependent braking, a potential-free signal contact signals if the motor has not come to a standstill within the maximum braking time.

Specifiche tecniche

Width: 110 mm
Braking current adjustable up to max.: 600 A
Braking time adjustable up to max.: 320 s
Automatic standstill monitoring: Yes
External brake contactor required: Yes
Signalling output: Yes
Temperature monitoring: Yes
Type: GB 9034

Vorteile / Kundennutzen

  • Higher safety and economic efficiency due to shorter run-out times
  • Easy to fit also into existing control circuits
  • Wear and maintenance free


  • According to IEC/EN 60947-4-2
  • DC brake with one way rectifier up to 600 A
  • Can be used on all asynchronous motors
  • Integrated braking contactor for devices up to 60 A
  • Mounting on 35 mm DIN-rail for 25 A units
  • Adjustable braking current
  • With automatic standstill monitoring
  • As option with indicator relay for standstill monitoring
  • As option with star-delta start function
  • As option with thermistor motor protection
  • As option with wide voltage input
    BN 9034: 200 ... 575 V, GB 9034: 200 ... 690 V
  • Width max. 310 mm