Emergency stop module BD 5935

Numero Ordine: 0045453
Type: BD5935.48 AC230V 50/60Hz

The BD 5935 is used to interrupt a safety circuit in a safe way. It can be used to protect... altro

Descrizione del prodotto

The BD 5935 is used to interrupt a safety circuit in a safe way. It can be used to protect people and machines in applications with e-stop buttons and safety gates.

Specifiche tecniche

Width:	45 mm
Cat. / PL acc. to EN ISO 13849-1:	4/e
SIL CL acc. to IEC/EN 62061:	3
Nominal voltage:	AC, DC
Suited as safety gate monitor:	Yes
Thermal current Ith max.:	10 A
1- / 2-channel:	1, 2
Cross fault detection:	Yes
Connection:	Pluggable screw terminals
Output contacts max.:	1 NC contact, 3 NO contacts
Approvals:	UL-Recognized
Type:	BD 5935

Downloads

Vorteile / Kundennutzen

Safe disconnection of electrical circuits
Line fault detection on ON pushbutton
Gold plated contacts to switch low loads (signal to PLC)
Optionally cross fault detection in emergency stop circuit
Easy exchange of devices by removable terminal strips

Merkmale

According to
- Performance Level (PL) e and category 4 to EN ISO 13849-1
- SIL Claimed Level (SIL CL) 3 to IEC/EN 62061
- Safety Integrity Level (SIL 3) to IEC/EN 61508
1- or 2-channel connection
Operating state display
LED display for channels 1 and 2
Overvoltage and short circuit protection
Wire connection: also 2 x 1.5 mm² stranded ferruled (isolated), DIN 46228-1/-2/-3/-4 or 2 x 2.5 mm² stranded ferruled DIN 46228-1/-2/-3
Output: optionally 1 NO / 1 NC or 3 NO / 1 NC contacts
Optionally automatic ON function or activation via the ON pushbutton
With fast auto start as option
Width 45 mm