E. Dold & Söhne GmbH & Co. KG

Tel.: +49 7723 654-0
E-Mail: dold-relays@dold.com

• Representatives
• Contact form

Direct contact for orders

Tel.: +49 7723 654-454
E-Mail: ab@dold.com

Direct contact for technical questions

Tel.: +49 7723 654-459
E-Mail: rv@dold.com

Direct contact for shipping inquiries

Tel.: +49 7723 654-455

PCB relays

PCB relays with one or two contacts, in different installation heights and with different contact materials

PCB relays, also known as plug-in/print relays, are used for galvanic separation of circuits as well as for signal adaptation and signal strengthening. Our vertical and horizontal designs enable optimum adaptation to your application. Dold PCB relays, with max. continuous currents up to 16 A, are available with one or two contacts, in different installation heights and with different contact materials.

PCB relays with one or two contacts, in different installation heights and with different contact materials PCB relays, also known as plug-in/print relays, are used for galvanic separation of... read more »
Close window
PCB relays

PCB relays with one or two contacts, in different installation heights and with different contact materials

PCB relays, also known as plug-in/print relays, are used for galvanic separation of circuits as well as for signal adaptation and signal strengthening. Our vertical and horizontal designs enable optimum adaptation to your application. Dold PCB relays, with max. continuous currents up to 16 A, are available with one or two contacts, in different installation heights and with different contact materials.

Highlights

  • Galvanic separation between control and load circuits
  • Switching of loads up to 16 A with low nominal drive power
  • Up to 8 contacts in one contact set
  • Low contact transfer resistance
  • Increased insulation values through partially equipped contact sets
  • Energy efficiency through sensitive relays or bistable switching behaviour
  • Smallest dimensions
  • Suitable relay sockets for quick component replacement

Product Finder

Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
No results were found for the filter!

Monostable and bistable PCB relays

While the contacts of the monostable PCB relays return to the original switching position after the excitation variable is switched off, the switching position of the bistable relays is maintained after the excitation variable is switched off. Energy is therefore only required for a short time to change the switching position.

Relays with relay sockets or plug-in sockets or for printed circuit boards

PCB relays are suitable for plugging into relay sockets or plug-in bases or for soldering into printed circuit boards. The combination of plug-in socket and relay allows a quick exchange during maintenance or service.

Typical applications are:

  • Building automation
  • Installation technology
  • Power engineering
  • Remote switch
  • Staircase light switch

Not found the right relay or PCB relay?

Dold offer a wide range of bistable relays, miniature relays and safety relays with forcibly guided contacts.