E. Dold & Söhne GmbH & Co. KG

Tel.: +49 7723 654-0
E-Mail: dold-relays@dold.com

• Representatives
• Contact form

Direct contact for orders

Tel.: +49 7723 654-454
E-Mail: ab@dold.com

Direct contact for technical questions

Tel.: +49 7723 654-459
E-Mail: rv@dold.com

Direct contact for shipping inquiries

Tel.: +49 7723 654-455
SL 5882

Residual current monitor, Type A

SL 5882

Contacts

Auxiliary voltage

Measuring range

Time delay

Approvals and Markings

Variant

  • 0055515
  • SL5882.38 AC/DC24-230V 10A tv=5S
The residual current monitors IL/SL 5882 of the VARIMETER RCM series are suitable for detecting... more

Product description

The residual current monitors IL/SL 5882 of the VARIMETER RCM series are suitable for detecting insulation faults in earthed systems as well as for monitoring and preventive maintenance of electrical systems. Insulation deterioration can be detected at an early stage and indicated to the operator of the installation without immediately causing an interruption of operation.

Technical specifications

Width: 35 mm
Adjustable measuring ranges: 0,01 - 10, 0,01 - 30 A
Operate delay: Yes
Classification: Type A (AC, DC pulsating)
Type of voltage: AC, DC pulsating
Broken conductor detection: Yes
Clear key: Yes
Test key: Yes
Relay contact / output: Yes
Enclosure design: Switch cabinet
Type: SL 5882

Advantages

  • Preventive fire and system protection
  • Increasing the availability of plants by early fault detection
  • With external residual current transformer
  • Protection against manipulation by sealable transparent cover over setting switches

Features

  • According to IEC/EN 62020
  • For AC and pulsating DC currants Type A to IEC/TR 60755
  • 9 tripping values from 10 mA to 10 A or from 10 mA ... 30 A
  • Frequency range 20 ... 2000 Hz
  • Selection of manual or automatic reset
  • With prewarning
  • With test and reset button
  • Broken wire detection
  • Short reaction time
  • With adjustable delay tv
  • De-energized on trip
  • LED indication for auxiliary supply and state of contact
  • 2 x 1 changeover contact
  • Devices available in 3 enclosure versions:
    IL 5882: 63 mm deep with terminals near to the bottom to be mounted in consumer units or industrial distribution systems according to DIN 43880
    - Width 35 mm
    - For connection of external residual current transformer, e. g. ND 5016, ND 5019 or split current transformer ND 5014

    SL 5882: 100 mm deep with terminals near to the top to be mounted in cabinets with mounting plate and cable ducts
    - Width 35 mm
    - For connection of external residual current transformer, e. g. ND 5016, ND 5019 or split current transformer ND 5014