Smart motorstarter, for Modbus UG 9411

Numero Ordine: 0067522
Type: UG9411PM AC230V 50/60HZ 2A 0-10S

The smart motorstarter UG 9411 can be used for softstart, softstop, reversing and protecting 1... altro

Descrizione del prodotto

The smart motorstarter UG 9411 can be used for softstart, softstop, reversing and protecting 1 phase asynchronous motors. By measuring the line current a thermal model is used to calculate the motor temperature, and in the case of overtemperature the motor is disconnected. In addition also a thermo switch can be used. The reversing is done via relays. The relays are switched without current flow, this provides long service life.

Specifiche tecniche

Width:	22,5 mm
1- / 3-phase:	1
Auxiliary voltage:	DC 24 V
Load voltage up to:	AC 230 V
Load current up to:	7 A
Bus interface:	Modbus RTU
Temperature monitoring:	Yes
Type:	UG 9411

Downloads

Vorteile / Kundennutzen

Up to 6 functions in one device
- Reversing anticlockwise,
- Reversing clockwise
- Softstart
- Softstop
- Motor protection
- Phase failure monitoring
Widely used measuring and automation protocol
80 % less space
Simple and time-saving commissioning as well as user-friendly
Operation through parameterization via modbus
Hybrid relay combines benefits of relay technology with non-wearing semiconductor technology
High availablility by
- Temperature monitoring of semiconductors
- High withstand voltage up to 1500 V
- Load free relay reversing function
- Device overload
Pluggable clamps
TWIN- connection terminals to loop auxiliary supply and Bus

Merkmale

According to IEC/EN 60947-4-2
Modbus RTU-interface
To reverse 1-phase motors up to 50 ... 180 W or 180 W ... 1.1 kW at 230 V
1-phase softstart, softstop
3 potentiometer for setting the modbus adress and baud rate
5 LEDs for status indication
Reversing with relays without current, softstart, softstop with thyristor
Galvanic separation between control circuit and power circuit
Width: 22.5 mm

Dold Italia S.r.l.