Solid-state relay / contactor with analogue input for pulse packet control PK 9260/_4_

Numero Ordine: 0069706
Type: PK9260.91/040/00 AC24-240V AC10A

The PK 9260 solid-state relay/contactor has an analogue control input DC 4 ... 20 mA with which... altro

Chiudi menu

Descrizione del prodotto

The PK 9260 solid-state relay/contactor has an analogue control input DC 4 ... 20 mA with which the switch-on/switch-off ratio of the load current is controlled proportionally. The PK 9260 is available with pre-mounted heat sink (solid-state contactor) and without pre-mounted heat sink (solid-state relay).

Specifiche tecniche

Widths:	22,5 mm
Number of poles:	1-pole
Load voltage up to:	AC 480 V
Load current up to:	88 A
Analog Input Control:	4 - 20 mA
Type:	PK 9260/_4_

Downloads

Vorteile / Kundennutzen

Self-optimized impulse distribution with minimized cycle times
Allows for precise temperature regulation
Switching at zero crossing, providing outstanding EMC properties
With heat sink for DIN-rail mounting
Space saving, only 22.5 mm width

Merkmale

According to IEC/EN 60947-4-3
AC solid-state relay / -contactor for pulse package control of heating systems
DCB technology (direct bonding method) for excellent heat transmission properties
Control input DC 4 … 20 mA
Nominal voltage AC 24 ... 240 and AC 48 ... 480 V
Load current 10 A, 15 A, 20 A, 40 A, 50 A, 88 A AC 51
LED status indicator for control and failure
M4 flat terminal
Degree of protection IP20